awd rover 220sdi

awd rover 220sdi

Postby rovermad » Thu May 01, 2014 1:17 am

Right I have a rover 220sdi that I'm going to attempt converting to awd. I have got my self a freelander 2.0l di with a l series non intercooled engine. Has anyone ever tried this conversion before? Wat would be the best way to do this? Eg cut the floor in the rover and make a tunnel or try to mount the rover body onto the freelander floor and so on. Any help is welcome
Posts: 10
Joined: Thu Mar 21, 2013 2:18 am

Re: awd rover 220sdi

Postby E_T_V » Sun May 04, 2014 10:49 pm

This is a LOT of work. Do not underestimate it!

The freelander will have the Di engine as standard. The 220 can have either the intercooled engine (Di) or the non intercooled one (D).

You'll have to modify the rover floor to fit the transfer box and the propshaft. The rear axle will be quite a lot of work too.
Site Admin
Posts: 439
Joined: Thu Jan 29, 2009 9:38 pm

Return to Clutch and Gearbox

Who is online

Users browsing this forum: No registered users and 1 guest