Remapping

E_T_V
Site Admin
Posts: 439
Joined: Thu Jan 29, 2009 9:38 pm

Re: Remapping

Post by E_T_V »

I'd probably try some injectors from a 200/400/600 diesel first as these will likely give you an increase in poke. Then perhaps try the hammer mod or evry/garf mod and then if that isn't enough get a remap/rechip.
Kieranm105
Spanner Twirler
Posts: 62
Joined: Thu Feb 23, 2012 9:58 am

Re: Remapping

Post by Kieranm105 »

E_T_V wrote:I'd probably try some injectors from a 200/400/600 diesel first as these will likely give you an increase in poke. Then perhaps try the hammer mod or evry/garf mod and then if that isn't enough get a remap/rechip.
I have a bid on some sdi injectors at the minute. What are the other mods you mentioned?
E_T_V
Site Admin
Posts: 439
Joined: Thu Jan 29, 2009 9:38 pm

Re: Remapping

Post by E_T_V »

Hammer mod

http://roverdiesel.co.uk/forums/viewtop ... lit=hammer

Not subtle but it works

Garf/evry mod.

http://www.darkicedesigns.com/en/tuning ... 30bhp.html

Essentailly its a variable resistor and a switch. It fools the ecu into adding more fuel. Its the cheaper version of the old TU1 that rover-ron did. Its quick and dirty but effective.
Post Reply